57.50 57.50

NEW! The 12V DC Stabilizer 9A  converts the voltage of all Rebelcell 12V batteries to a stable 12V output voltage. This enables you to use your Rebelcell battery with (electronic) equipment that requires a stable 12V output or has a different operating voltage range than your battery. Using the Stabilizer can increase the runtime and ensure trouble-free operation of your equipment.

 

  • Application: depth sounders, LED lighting, camera equipment, GPS navigation equipment
  • Waterproof: filled up with epoxy resin, IP65 waterproof, can be used outdoors in wet surroundings, like a fishing boat or kayak.
  • Built-in abuse protection: switches off automatically in case of short circuit, high temperature, high voltage and deep discharge. With integrated 10A fuse in + output wire to protect your equipment.
  • Included: 12V DC Stabiliser 9A, 2x connecting wires (M8/Faston with XT60), 1x Anen PA-45.

Warranty: 6 Months

Quantity

In stock

SKU: 7106623694220
  • Easy connection M8 or Faston connector for easy connection to the battery. 1 click connection via ANEN PA-45 connector to your 12V equipment.
  • Waterproof filled up with epoxy resin, IP65 waterproof, can be used outdoors in wet surroundings, like a fishing boat or kayak.
  • Built-in abuse protection: switches off automatically in case of short circuit, high temperature, high voltage and deep discharge. With integrated 10A fuse in + output wire to protect your equipment.
  • Warranty: 1 year warranty.

PAY ATTENTION! READ THE FOLLOWING INFORMATION BEFORE PURCHASING THE PRODUCT:

Weight1 kg
Target

,

PLEASE REVIEW THE BELOW INFORMATION BEFORE COMPLETING YOUR ORDER

  • 1Only use with Rebelcell 12V batteries with a working voltage between 9.0V and 18.0V. Use with unsuitable batteries can damage the converter. Never use if the voltage of your battery is below 9.0V. The undervoltage will cause the converter to heat up rapidly and will lead to irreversible damage to your converter.
  • 2Pay attention to the polarity when connecting to your battery (+ wire to the + of the battery and – wire to the – of the battery). Reversing polarity may damage your converter and your equipment.
  • 2Only connect to 12V equipment with a power consumption of less than 9A. If you connect equipment that draws more power you will damage the converter!.
  • 3Never install or place the 12V DC Stabiliser on the battery. The 12V DC Stabiliser can become very hot and damage your battery. Fix the 12V DC Stabiliser on a metal (aluminum) plate with screws for safe use and additional heat dissipation.
Technical specifications
Type
non-isolated DC-DC converter
Voltage in
9V-18V
Voltage out
12V DC
Power
120 W
Maximum discharge
9A continuous, 12A peak
Working temperature
-20 ℃ ~ +65 ℃
Conversion Efficiency
93%
Power Consumption
20 mA
Ripple
45 mV
Wiring
input (to battery): 1 x 20 cm with XT60 connector with M8 tongue connector
input (to battery): 1 x 20 cm with XT60 connector with Faston connector
output (to equipment): 1 x 40 cm with ANEN PA-45 connector
Material
Aluminum
Dimensions
74 x 74 x 32 mm
Weight
300 g
Protection features
Short circuit protection
yes
High temperature protection chip
yes
Output overcurrent protection
yes
Output short-circuit protection
yes
Input overvoltage protection
yes
Built-in fuse
yes (9A) in + DC output cable
Input reverse polarity protection
no
Output reverse polarity protection
yes
Certification and warranty
Security class (IEC 529)
IP65
CE certificate
yes
Warranty
one year

Reviews

There are no reviews yet.

Be the first to review “12V DC Stabilizer 9A”

Your email address will not be published. Required fields are marked *

SAFE DELIVERY

Order before 12.00 will ship the next business day. Our shipping companies comply with ADR regulations to ship lithium-ion batteries.

SECURE PAYMENTS

All payments take place on a secure connection and are thoroughly scanned every day for viruses and other cyber security issues.

WARRANTY

2 years warranty on batteries and outdoorboxes. 1 year warranty on chargers and accessories.